A 2.5G Ethernet Adapter is an Ethernet port that supports the following connection speeds:
The 2.5G Ethernet Adapter is backward compatible with standard 100 Mbps and Gigabit devices and supports 2.5 Gbps connections on legacy Category 5E (Cat5E) and Category 6 (Cat6) cables. This means that you take full experience of the capability of your high-performance network devices without upgrading your cables.
With a USB-C 2.5G multi-Gig ethernet adapter, you are able to connect a USB-C laptop, phone, or tablet (such as Macbook Pro, Macbook Air, Dell XPS, Samsung Galaxy S21, and so on) to a multi-Gigabit router/modem, to benefits from speed up to 2500 Mbps.
To connect your laptop (take MacBook Pro 2020 as an example) to the internet using Ethernet, you need to prepare: a USB-C 2.5G Ethernet Adapter, 1 (or 2 with a router) Cat 6 ethernet cable, a multi-Gigabit router/modem.
1. Make sure the modem/router is turned on and connected to the wall jack with the cable that came with the modem/router. *To reach 2.5G speed, please make sure your broadband plan support at least 2.5G data speed.
2. Use the 2.5G Ethernet Adapter to connect to your laptop's USB C port.
3. Use a Cat 6 Ethernet cable to connect the 2.5G Ethernet Adapter to the modem/router
In many cases, you'll automatically connect to the internet. If not, check your Ethernet service settings and set it well:
For Mac systems, click here to check;
For Windows systems, click here to check.
Comments will be approved before showing up.